High-performance “magnetic rotor” for aluminum separator commercialized.
Mitsubishi Nagasaki Machinery had developed the high-performance “magnet rotor” for aluminum separator. This magnetic rotor achieves the aluminum recovery percentage of more than 95%, realizing the high-performance and the lower price. For increasing the aluminum separator performance, only the magnetic rotor can be replaced, without purchasing the one set of the equipment. As the user’s expense would be less in this case, expansion of scale of replacement market would be expected.
High-performance “magnetic rotor”
Upper part of converter furnace for a steel-manufacturing company manufactured and delivered.
Upper part of converter
As a part of the aged equipment replacement work in the steel field, we had manufactured and delivered two pieces of upper part of converter furnace body, approximately 70 ton each.
Vibration isolators continuously manufactured and delivered to overseas countries such as India and Thailand.
Mitsubishi Nagasaki Machinery had manufactured and delivered three kinds of vibration isolators for forging press with difference specifications to India. As the user will install the isolators themselves, the vibration isolator equipment is constructed from the vibration isolator frame, the coil spring and the viscous damper, devising to simplify the installation work and to improve the safety. The customer had given us a high reputation as the installation work had been completed in a short period of time without any problems. Also, the vibration isolators for the largest size class screw press had been manufactured and delivered in Thailand.
Vacuum chamber for a steel-manufacturing company manufactured and delivered.
Vacuum chamber
Mitsubishi Nagasaki Machinery had manufactured and delivered the vacuum chamber. corresponding to the needs of the equipment replacement of a steel-manufacturing company. This vacuum chamber, which is one of the equipment in the largest vacuum induction melting furnace in the country, is the equipment refines the metal under vacuum. As this equipment cannot be ocean-transported, it had to be dismantled to several pieces in land-transportable sizes, and had to be assembled at site. The manufactured total weight was approximately 500 ton. Also, as it is a vacuum equipment, helium leak tests were performed at on-site welding points.
500 T ram moving press delivered.
500 T ram moving press
We have delivered the 500 T ram moving press. In addition to the function to have the main cylinder with max. 500 ton pressing capacity traverse, with the ram head rotate 360 degrees, this equipment can correspond to the various shapes correcting. This press is equipped with the pressure adjustment function and other useful utilities for deformation correcting work and plate bending work.
Magnetic separator/aluminum separator combined equipment delivered.
Magnetic separator/Aluminum separator combined equipment
We have delivered the magnetic separator/aluminum separator combined equipment delivered. This is the equipment that, after collecting the magnetic matters, collects such non-ferrous metals as copper and aluminum by the high-performance aluminum separator. In the processing line, this takes the important role of separating equipment collecting the valuables from the wastes.
